Sunday, August 4, 2013

Robot Stamped Tote Bag


I don't know about you but I feel guilty every time someone hands me a plastic bag. I try to be that person who never needs to say yes to a plastic bag but often I find myself ducking into the shops on my lunch break or on my way home to grab groceries or last minute purchases. This is why I resolved to actually sew myself something that would help with this problem. Enter the roll up tote bag.

The lovely people at Craftpon offered me some products to blog about (lucky me!). I had a look through their 3 stores CraftponStampcow and SNVY. I decided on these adorable robot stamps from their Stampcow store. I also chose some bird stamps too but I just couldn't resist working with the robots first!


For those of you who follow me on instagram you may have seen me testing out these cuties today. 


I used two different fabric paints that you can buy from Lincraft or Spotlight (or a craft store of your choice if you're not in Australia).



Maybe you've made a tote bag before, maybe you haven't. So I'll share the measurements here for you anyway. Basically I wanted to end up with a tote bag 40 centimetres wide by 45 centimetres long. The measurements I cut were 49.5 (45 + 1.5cm bottom SA + 3cm top SA) by 43 (40 + 1.5cm SA on either side). I wanted my straps to be 2.5cm wide by 67cm long. The measurements I cut were 73 (67 + 3cm SA on either end) by 10 (2.5 cm x 4 so I could fold the sides in halfway and then again ~ like bias tape). I also made some straps to sew in the bottom seam that I could sew a snap fastener on the end of. This way I can roll the bag up and snap the fastening shut and keep the rolled up bag in my handbag tucked away. I initially made straps 15 centimetres long based on rolling up my muslin but for the finished product I made them 19 centimetres because the straps and seams add extra bulk. I made one strap 1cm longer than the other so the straps were 11 (9 + 1 cm SA either side) and 13 (11 + 1cm SA either side) by 2.5 (1.5 + 1 cm SA either side) . Ok enough maths.


I stamped my pattern out on the fabric being super careful with the amount of paint I used. The photo below is a bit terrible but I learnt along the way that I got a really even stamped image when I dabbed the paint on covering the whole robot and then used the brush to stroke it evenly across the stamp.


You might be able to tell from the below photo that some of my stamping was better than others. Sometimes the light blue robot had two eyes, sometimes he had one. But that's cool it's all part of the charm right?

I left the fabric for about an hour to dry before coming back to sew it all together. I overlocked the seams then made the straps for the bottom.


I pinned the straps in place then french seamed on my regular machine. On a side note I did trim the excess before turning the straps out but they're still very round looking on the ends. I don't mind them being round but it wasn't my intention. Just sayin.


Finally I sewed up the straps, pinned them to the top of the bag, turned it over 1.5cm and over again another 1.5cm and sewed it all up.


And here she is! A ridiculously cute tote bag that I can roll up and stash in my handbag.
I'm not really sure why I waited so long to stamp some fabric, I've been dying to do this for ages. I think I just held a little bit of fear because I'd never done it before. Luckily theses stamps were so cute (and easy to use) that I was able to whip this up in one afternoon.


I didn't have time to sew on the snap before the sun went down but it's on there bein all snap like. Now I need not fear when people ask if I need yet another plastic bag. Never fear the robots are here!


Use your sewing powers for good!

14 comments:

  1. I freakin love this! Robots make for a great motif :-D

    ReplyDelete
  2. Brilliant Robots and great idea for a fold up tote!

    ReplyDelete
    Replies
    1. Yeah I hope to get a lot of use out of it.

      Delete
  3. Mega cute tote bag. I think your stamping looks pretty even from what I can deduce from your photos. Well done.
    I have made a couple of Totes myself but the worse thing is I sometimes forget to put them in my bag to be used for their intended purpose of reducing the need for plastic bags.... You could always knit the plastic bags into something fun....

    ReplyDelete
    Replies
    1. Thanks, yeah I need to have a spot in my handbag so I've always got this with me!

      Delete
  4. The robot motifs are gorgeous. I was just thinking of making some more bags for shopping and maybe making a stencil. I never would have thought of stamps. Duh!

    ReplyDelete
    Replies
    1. Yeah stamps make the whole thing super easy and there are so many cute ones to choose!
      I'd love to see what you make!

      Delete
  5. This is so cute and such a great idea!! I definitely need to try this :)

    ReplyDelete
    Replies
    1. Yeah it was so simple I hadn't thought of it before.
      I'm glad the stamps prompted me.

      Delete
  6. Great thing to have a nice tote bags.

    ReplyDelete
    Replies
    1. Thanks! It's still going strong and it's still in my handbag. Winning!

      Delete
  7. Thanks for great tutorial. I also want to try it with my mom. Please tell me from where you bought these colors. I could find these colors on internet.

    ReplyDelete
    Replies
    1. I bought them at a local craft store. I'm not sure where you would buy them online, sorry.

      Delete